Disable Friendly Products Active

Corner Guard

Product summary

Rubber corner guards are essential safety and protection components used to shield structural corners from vehicle impact and prevent damage to equipment or pedestrians. Below is a standard industrial-grade specification.

Detailed product information

1. Product Overview

Material: High-impact resistant SBR (Styrene Butadiene Rubber) or NR (Natural Rubber) blend.

Application: Parking garages, warehouses, loading docks, and commercial corridors.

Function: Impact absorption and visual warning.

2. Physical Dimensions

Feature	Standard Requirement
Shape	L-shape (90° angle) or Bullnose (rounded)
Thickness	8mm to 12mm (depending on impact rating)
Wing Width	100mm x 100mm (standard)
Standard Heights	800mm, 1000mm, or 1200mm

3. Material Properties

Hardness: $65 \pm 5$ Shore A (ASTM D2240).

Tensile Strength: Minimum 6.0 MPa.

Elongation at Break: Minimum 250%.

Weather Resistance: UV stabilized for outdoor use; resistant to extreme temperatures (-20°C to +60°C).

Chemical Resistance: Resistant to oil, grease, and common cleaning agents.

4. Safety Features

Visibility: Equipped with high-intensity reflective yellow or white tape (beaded or prismatic) for low-light visibility.

Reflective Pattern: Chevron or solid stripe design.

Texture: Matte finish to prevent glare and mask minor scuffs.

5. Installation & Mounting

Fixing Method: Mechanical fastening via pre-drilled holes.

Hardware: M6 or M8 stainless steel/galvanized anchors with plastic shields.

Adhesive (Optional): High-strength epoxy or polyurethane adhesive for smooth surfaces where drilling is prohibited.

6. Performance Standards

Note: The product should comply with local building and safety codes (e.g., OSHA standards for workplace safety or relevant ISO certifications for rubber quality).

7. Maintenance

Cleaning: Use mild soap and water. Avoid abrasive scrubbers that may damage reflective tape.

Inspection: Periodically check for anchor tightness and integrity of reflective strips.